Magmaweld ID 300 E, Руководство пользователя

Страница: 17 / 68

EN
17
www.magmaweld.com
ID 300 E
USER MANUAL | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
3.2 MMA Welding
3.3 Touch-Scratch TIG Welding
3.4 Remote Control (Optional)
• Push the welding mode selection button for selecting the stick electrode welding mode. Stick electrode
welding led ligths.
• Adjust the current via current adjustment konb.
• Below table can be used as a rough reference for mild steel electrodes. For exact parameters, please refer to
the electrode manufacturer’s recommendations.
• Push the welding mode selection button for selecting Touch-Scratch TIG welding mode. Touch-Scratch
welding led lights.
• Adjust the current via current adjustment knob.
• Start welding. You can observe welding current and voltage by current display and voltage display.
• It is possible to connect wireless or cable remote control unit. In this case, appropriate control socket must be
installed onto the back cover by a certifies Magma Service.
• When the remote control connector is connected to the machine, ampere adjustment knob on the machine is
disabled automatically and current adjustment is made by the remote control.
• For better ignition turn the
HOT START
knob clock-wise. Welding arc can drill the metal when it is very thin
and hot start is high.
•
ARC FORCE
is useful for electrodes which have tendency the knob clock-wise will decrease the tendency to
stick. If
ARC FORCE
is adjusted too high, spatter increases.
• Start welding. You can observe welding current and voltage by current display and voltage display .
Operation
Covered Electrode
Diameter (mm)
Recommended Welding Current
Rutile
2.0
2.5
3.25
4.0
5.0
6.0
40-60 A
60-90 A
100-140 A
140-180 A
200-240 A
260-300 A
-
60-90 A
100-130 A
140-180 A
200-250 A
-
-
60-100 A
70-130 A
120-170 A
160-200 A
-
Basic Cellulosic