Magmaweld ID 250T DC, Руководство пользователя

Страница: 11 / 60

11
www.magmaweld.com USER MANUAL | KULLANIM KILAVUZU
ID 250T DC / ID 300T DC
EN
1-
Torch Strap
7-
Torch Control Connections
2-
Control Panel
8-
Earth Cable and Welding Cable Socket (-)
3-
Pedal Control Connections
9-
Gas Input
4-
Earth Cable and Welding Cable Socket (+)
10-
Remote Connection Input
5-
Gas Output
11-
Power Switch
6-
Parameter Adjustment Pot
12-
Line Cable Inlet
TECHNICAL INFORMATION
1.1 General Information
ID 250T DC and ID 300T DC is an inverter type portable, mono-phase Pulsed DC TIG-MMA welding machine
designed for TIG welding of all kinds of thin metal sheets except aluminum & for MMA welding of all kinds
of stick electrodes up to 5 mm. Enhanced professional TIG controls such as, HF start, Touch-Lift, Pre-Gas,
Up-Slope, Pulse, Down-Slope, Post-Gas & Crater filling are present. Up to 10 complete jobs can be stored in
the memory and run when it is necessary. Current, time and program settings can easily be monitored by
digital displays. Therefore this machine is quite immune to mains voltage fluctuations and perfectly welds
with generator-sets. ID 250T DC and ID 300T DC can also be used with long welding cables up to 25 mt. The
machine is fan cooled and thermally protected against over heating.
Figure 1 : ID 250T DC
11
12
10
9
1
4 8
3
5
7
2
6
1.2 Machine Components
Technical Information