Magmaweld ID 250E, Руководство пользователя

Страница: 16 / 76

16 ID 250E
EN
www.magmaweld.com USER MANUAL | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
2.6 Connections for TIG Welding
• TIG torch with gas valve should be used.
• Connect the power cable of the TIG torch to the negative welding
socket and the ground cable to the positive welding socket
• Connect to the argon gas cylinder.
• Connect the torch’s gas hose to the gas regulator.
• Keep the gas cylinder valve open for a while so that possible sediment
and particles are ejected.
Figure 5 : TIG Welding Connection
The following table shows approximate values;
Figure 4 : Gas Cylinder Connection
Electrode Diameter
(mm)
Nozzle Diameter
(mm)
Welding Current
(ADC)
Gas Flow
(lt/min)
1.0
1.6 6.3
9.5 15 - 70
30 - 150
6 - 8
6 - 8
Installation