MAGMATIC MAGMA FOG 1500IP-II, Руководство пользователя

Страница: 16 / 28

16
S E T U P
1. Open the shipping carton and carefully remove the unit. Be sure to remove ALL the packing material,
paying particular attention to the area around the fog outlet vent.
2. Set the unit on a flat dry surface, then unscrew the tank cap and fill the reservoir with Atmosity
Extreme Filtered Fog Fluid (AEF-2L, AEF-4L, AEF-20L). Never run the unit on anything other than
approved, MAGMATIC branded fluid, as doing so can result in severe damage to your device.
3. Screw the tank cap back onto the fluid tank. Be careful not to pinch, twist, or tangle the feed tube
that is connected to the tank cap.
4. Connect the included power cable to the back of the unit (located underneath the touch-screen
display) and connect the the unit to a properly rated power source. Allow the unit to warm up for at
least fourteen (14) minutes before beginning fog emission.