MAGMATIC CRISP, Руководство пользователя

Страница: 10 / 18

1. Open the shipping carton and carefully remove the device.
2. Be sure to remove ALL the packing material, paying particular attention to the area around the fog
outlet vent. Set the device on a flat dry surface.
3. Make sure that the unit is disconnected from power and the wheels are locked.
4. Release the three (3) latches on the tank filler access lid, and open the lid. Be careful of the lid
hinges and latches so as to avoid pinching your hands or fingers.
5. Unscrew the tank filler cap and fill the tank. Use only Atmosity Premium Snow Fluid (APS-2L,
APS-4L, APS-20L, APS-200L) as specified by the manufacturer. Use of other, non-approved
fluids could severely damage your device.
6. Screw the tank cap back on and and close and latch the tank filler access lid.
7. Connect the cable connection and the fluid connection on the connector panel to the matching
connectors on the removable snow cannon, using the included 10-m hose and extension cable if
needed.
NOTE: When securing the cable connections together, make sure to do so only by turning
the thinner nut on the connector containing the MALE PINS!
Twisting the connector containing the female pins may cause damage to the connector and
expose the electrical components inside to the elements!
8. Connect the device to power and use the touch screen display to operate the device as desired.
SET UP
10