background image

6

MAINTENANCE

USING GRILL WITH LPG (PROPANE) SYSTEMS

     Stainless steel contrary to popular belief can rust. Most commonly, deposits on surface of the product will trap moisture.  It is 

this moisture that robs stainless steel of oxygen. Oxygen is the element that reacts with stainless steel to form a protective layer of 

chrome oxide. Robbed of oxygen, this reaction does not take place and “crevice corrosion” or “surface rusting” occurs. To 

minimize this effect, thoroughly clean your grill with soap and water, rinse with fresh water, and dry. Avoid using stainless steel 

polishes on grill exterior as most leave a residue that may discolor when grill is heated.
      Additionally, stainless steel that is exposed to high heat will change color and texture over time. The “amber” color of grill 

exterior and internal components is not a failure of the stainless steel and will not affect  products operation. When this happens, 

we recommend using 

“Magma Magic” Grill Restorer

 to remove the “amber” color and return grill to its original luster. 

However, prolonged exposure to extreme high heat will cause chromium and nickel to “burn out” of stainless steel. At this point 

stainless steel will become more susceptible to corrosion and will start to deteriorate. We recommended replacement of internal 

components as they become seriously deteriorated. 
      We recommend thoroughly cleaning grill and internal components after each outing. Disassemble interior components and 

remove all food residue. Use a “Scotch Brite” pad or similar product and “Easy-Off” oven cleaner for cleaning grills interior 

components, followed by thoroughly washing with soap and water, rinse with fresh water & dry. AVOID CONTACT OF OVEN 

CLEANER  WITH SKIN, CONTROL VALVE, IGNITOR ELECTRODE & WIRE. CAUTION: DO NOT USE ANY TYPE OF ABRASIVE PAD ON 

EXTERIOR MIRROR FINISH AS IT WILL SCRATCH SURFACE, USE ONLY A SOFT CLOTH. We recommend covering grill between uses. 

Grill covers are available at Magma retailers or directly from Magma. See our website: 

magmaproducts.com    

After cooking Do 

Not turn grill to high heat to burn off grilling residue. The grill is not a self cleaning oven & this extreme heat can damage 

stainless steel components.

Grill Grates

 

-

 Clean with brass wire brush while grill is warm. Use Oven & Grill cleaner for burnt-on residue. Wash with  

soapy water and dry prior to storage.

Ceramic Electrode

 

Located just beside the burner, it should be kept clean of grease and debris. Be careful not  to damage the 

ceramic insulation or the wire. See page 5 for electrode spark adjustment.

Control Valve

 

-

 All valves are set and tested at our factory. Do not attempt to adjust or disassemble the valve in any way.  

Call Magma if you suspect it is not adjusted properly. Clean valve with a cloth and remove any debris obstructing the orifice.

Repair/Replacement Parts - 

All replacement parts are readily available at your Magma Retailers or directly from Magma.  

For a complete list of replacement parts visit our website 

MagmaProducts.com

.

  

• Magma LPG (Propane) Valves & Hose Kits allow Magma 

Grills to be installed within existing, pre-regulated low 
pressure LPG (Propane) system. 

• Use only 

Magma Type 3 Low Pressure LPG (Propane) 

Valves.

 See our 

Valve Application Guide

 at 

MagmaProducts.com

 for correct valve.

• In North America use 

Magma A10-225 LPG 10' Gas 

Grill Connection Kit

 in conjunction with 

Type 3 Valve. 

Outside North America check  
your local dealer for proper hose and fittings. 

• A primary shutoff valve 

(supplied with Gas Grill 

Connection Kit)

 must be used with this control valve at 

point of connection into  your system. This allows shut off 
of gas supply to hose leading to grill.

• 

In Australia & New Zealand LPG fuel systems must 

be installed by a certified  

gas technician. 

Gourmet 

Gas Grill

Align valve stem key
to valve chamber
lock detent and rotate

Gourmet 
Gas Grill

Propane (LPG)

Gas Regulator

A10-225 LPG (Propane)

10' Gas Grill Connection Kit

To other LPG

appliance

or use cap

Shut off

valve

Cylinder Valve

Gauge

Gourmet 

Gas Grill

Gourmet 

Gas Grill

Type 3

Valve

Type 3
 Valve

Solenoid

Typical Pre-Regulated 

LPG Application

Gourmet 

Gas Grill

Align valve stem key
to valve chamber
lock detent and rotate

Gourmet 
Gas Grill

Propane (LPG)

Gas Regulator

A10-225 LPG (Propane)

10' Gas Grill Connection Kit

To other LPG

appliance

or use cap

Shut off

valve

Cylinder Valve

Gauge

Gourmet 

Gas Grill

Gourmet 

Gas Grill

Type 3

Valve

Type 3
 Valve

Solenoid

Typical Marine & 

R.V. Application

Содержание Traveler RV Camping Series C10-601T









Отзывы: