Magma EB3600-10, Руководство пользователя

Страница: 37 / 143

Magma
EB3600-AB | Chapter 2 Hardware Installation 37
There are minute components that are mounted above the gold-finger connector of the
K80 and some GPUs, see pictures below. When these components are broken off or
become detached from the board, your K80 or GPU will be inoperable.
Be very careful and cautious when plugging in a GPU into a PCIe slot. If the card is not correctly aligned
to the slot while plugging in, it can hit and damage one of these components. See picture below as an
example of a detached / damaged components.
To avoid damaging these components, install the GPU in the far right of the backplane (looking from the
rear) and align the GPU connector on top of the PCIe slot and slowly push it down until firmly seated.
Make sure that all cards are fully seated in their connectors. When correctly seated, there will be a firm
resistance when you pull up gently the card. To keep the cards in place, secure them in the enclosure with
their retaining screws.