Altitude Adjustment
OPERATING PROCEDURES
Opening Handles for Table Support
1. Pull handles up from bottom until they lock into place.
2. Unclip and open covers/tables until they rest on the handles.
3. To close the handle, pull the pin under handle to release and fold down.
7
Normal flame should be all blue and look like its touching the burner at the bottom, with a minimal amount of yellow/orange.
Too much yellow/orange indicates that there is not enough primary oxygen, and the adjuster should be raised towards the high
altitude position. If flame its blue and “roaring” with the base looking like it’s raised off of the burner then you have too much
primary oxygen. The adjuster should be moved towards sea level/lower altitude.
Slide up or down, depending on your elevation.
