Burner
Lid Lock
Grill Grates
Lid
Handle
Radiant Plate
Outer Shell
Liner
Match Light
Hole
Mount Support
Pad with
Folding Legs
Valve Chamber
Slide Out
Grease Tray
Control Valve
Regulator
Type 1
Extra-Low
Output
See Magma website
for replacement part numbers
and valve applications.
MagmaProducts.com
Single mount non-through-bolt
applications, including Style 1 “Levelock”
4 Hex head bolts & lock washers.
Note: Place lock washers on hex bolts as shown above.
MOUNT HARDWARE
Fasteners are supplied for Single Mount
grill mounting options. See Magma Catalog
or Website for best mount selection.
Single mount through-bolt applications
4 Carriage bolts & lock nuts.
Note: Place washers on carriage bolts as shown above.
Hex head bolt
& lock washer
Carriage bolt,
washer & lock nut
TrailMate™ INSTALLATION INSTRUCTIONS
CONTROL VALVE REGULATOR
•Uses standard 1 lb. disposable propane canisters (DOT-39 NRC).
•Prior to installing valve, become familiar with the valve function & graphics on valve
knob. Never force the knob. Always turn or push gently.
•Turn control valve to “lock” and install gas canister being careful not to cross the
threads. Check for leaks prior to use, by brushing soapy water solution around threads
and orifice hole checking for bubbles.
•Position valve with gas bottle as shown
(A)
. Gently insert valve stem into valve
chamber. Rotate until valve stem key aligns with lock detent allowing valve to fully
insert. Rotate gas canister down, so knob faces you
(B)
or straight up
(C)
depending
on application. Pull straight out on valve to check that it is locked in place.
Valve will feel loose and will rotate easily. Even though the valve feels loose, it is designed that way and will not
leak. The valve was designed to be loose fitting in order to allow safe, easy installation and removal of the
propane canister and so it easily swings without resistance to fit all applications.
(For ChefsMate™ Installation Instructions, see page 3.)
4
