Grease
Tray
Grease Tray Pins
5
With grill body tightly attached to L-Bracket, unthread burner
3 full revolutions only.
CAUTION: DO NOT UNTHREAD MORE THEN 3 REVOLUTIONS, AS GRILL MAY FALL
OVERBOARD.
• Lift entire grill up to disengage from grease tray positioning pins
(5a & 5b)
and rotate so lid
operates freely in desired position
(5a)
.
• Carefully lower back down
(5d)
, making sure pins are re-engaged and rethreaded “burner”
back 3 revolutions until tight
(6)
. If burner does not turn 3 revolutions the pins are not
engaged properly.
5a
5b
5c
5d
Threaded
Burner Pipe
7
Install radiant plate over burner on bowl ridge.
8
Install grill grate by rotating grate so that both grill grate tabs slide under the holding clips
(8a)
,
locking grate and all internal components in correct position.
9
Insert the venturi tube into the threaded pipe on the bottom of the grill body and firmly tighten
the holding nut so nut doesn't turn while rotating the turbo venturi tube. Note: venturi tube
should still rotate freely. Venturi tube should be stowed with valve in a clean dry environment
when not in use. (See "Stowing Tips" page 6) Before each use, prior to inserting venturi tube,
check that the threaded pipe is free of spider web obstructions.
4
8
7
8a
9
5
6
5b
