![MAGINON BTH-100 Скачать руководство пользователя страница 21](http://html1.mh-extra.com/html/maginon/bth-100/bth-100_instruction-manual_3518341021.webp)
19
10. Conformity
This device was tested according to Part 15 of the FCC regulations and it was confirmed that
the device complies with the limit values for class B digital devices. The aim of these limit
values is to provide appropriate protection against adverse sources of interference in case of a
domestic installation. If the device is not installed in accordance with the instructions, it may
cause interference for TVs, radios and mobile radios.
This device may be operated provided that the following is being observed:
(1) This device may not produce any harmful interference.
(2) The device must accept the effects of any interference. This includes interference
that may cause undesired operation or operational faults.
In the event of radio or television reception being affected by this device – this can be
easily tested by switching the device on and off – the user should try to remedy the fault
by taking the following action:
•
Turning the receiving aerial in another direction or changing its location.
•
Increasing the distance between the device and the receiver.
•
Contact your dealer or a radio/TV-
expert.
The Manufacturer hereby declares that the CE marking was applied to the product in
accordance with the basic requirements and other relevant provisions of the following
European Directives:
2011/65/EG RoHs directive
2004/108/EG EMC directive
The EC Declaration of Conformity can be requested from the address
specified on the Warranty card.