Magigoo Coater, Руководство пользователя

Страница: 23 / 24

Warranty
23
5.3 Conditions & Limitations
By offering this warranty, the Manufacturer
accepts no liability for providing any
additional services or for any damages
or compensation for losses or injury of
any kind resulting from product failure or
non-conformity with specifications or for
any delay or failure in providing warranty
services whether these are direct, indirect,
special or consequential. In any event, the
Manufacturer is not liable for any indirect
or consequential damages, including but
not limited to loss of use, loss of profit or
revenue. In any instance, the Manufacturer’s
liability shall be limited to the price paid for
the Product.
Furthermore, the Manufacturer warranty is
granted under the explicit condition that:
- The Product was sold, delivered and
assembled by a reseller recognised by the
Manufacturer;
- The Product was newly-manufactured on
the date of purchase and not sold as used,
refurbished or manufacturing seconds;
- The Manufacturer’s installation and
maintenance instructions as described in
the Product manual have been observed.
For a warranty claim to be valid:
i. notification of a warranty claim must
be made before the end of the warranty
period and in the manner stipulated
herein;
ii. it must conform with any additional
stipulations of the warranty, as defined
below
iii. it must be substantiated with the
original purchaser’s purchase invoice;
iv. the serial number sticker must still be
on the Product(s); and
v. the Product(s) must be returned in the
original packaging.
Since warranty claims are conditional on
the submission of the original purchase
invoice and packaging, the Manufacturer
advises purchasers to store the invoice and
official packaging in a safe place.
If the original packaging is not available
anymore, the purchaser can purchase
replacement packaging from the
Manufacturer.
5.4 Lodging Claims
Any notification on the basis of this warranty
must be made to Manufacturer within the
warranty period at the following address:
Address info@thought3d.com
Address Thought3D Ltd, U2150, KBIC, Kordin
Industrial Estate, Paola, PLA 3000, Malta.
5.5 Applicable law and
competent court
This warranty shall be governed by the laws
of the Republic of Malta and any dispute
arising in connection with the same shall
be submitted to the exclusive jurisdiction of
the Maltese Courts.