MAGICFX
®
STADIUMSHOT III
—
User and Installation Manual
27
5.
After a maximum of 2.5 minutes, the pressure will be at the maximum pressure
of 8 bar. The compressor will automatically stop at the set pressure and the
compressor on/off button turns red.
If an external air source is used for the first time, follow the next steps. If an external air
source is used when the desired quick connector is installed, follow step 5 only:
1.
Remove the top cover, see Section 4.1.
2.
Remove the elbow part of the 3-way coupling with an adjustable open-
ended spanner.
3.
Replace the end plug in the elbow with the desired quick connector suitable
for the desired quick connector.
4.
Close the top cover, see Section 4.1.
5.
Connect the hose from an external air source to the quick coupling. Only use
an air source with an air filter with a maximum output of 8 bar.
3.5
SHOOT WITH DMX OR PYRO
DANGER
Make sure that the described safety zone is clear of people,
animals and objects. Not doing so results in death or serious
injury.
If DMX is used, follow the next steps:
1.
Make sure that the prescribed safety zone is free from persons and objects.
2.
Set the safety key on the ARM CONTROLLER in the ON position. The FX LED lights
in red, indicating the system is now armed and the STADIUMSHOT III and other
connected SFX machines are ready to be operated.
3.
Activate the enable address. The FX LED begins to flash.
4.
Set the DMX value for the effect channel between 200 and 255 to shoot.
Содержание STADIUMSHOT III
