MAGICFX
®
STADIUMSHOT III
—
User and Installation Manual
23
3.2
CONNECT THE MACHINE
1.
Install the ARM CONTROLLER in compliance with the instructions from the ARM
CONTROLLER User and Installation Manual (PART01882).
2.
Connect the PowerCon TRUE1 power cable to the power input of the
STADIUMSHOT III. Connect the other end to a 100-250 Vac (50-60 Hz) power
source.
3.
Connect the correct cables between the ARM CONTROLLER, the STADIUMSHOT
III, the control equipment, and other ARM SYSTEM components and machines
(if applicable). Check the following variants for connection details.
A
The STADIUMSHOT III is controlled with DMX. The DMX signal and the ARM signal
have separate cables.
B
The STADIUMSHOT III is controlled with pyro (24V).
STADIUMSHOT III
connect another machine
or insert terminator
DMX
DMX CONTROLLER
ARM CONTROLLER
E-STOP
BEACON
ARM
ARM
insert
terminator
POWER
STADIUMSHOT III
PYRO CONTROLLER
ARM CONTROLLER
E-STOP
BEACON
ARM
ARM
insert
terminator
POWER
connect another machine
or insert terminator
PYRO
Содержание STADIUMSHOT III
