24 MAGICFX
®
STADIUMBLASTER
—
User and Installation Manual
3.6
CONNECT POWER AND SETUP DMX
PowerCon TRUE1 female
POWER
5-pole female
DMX
POWER IN
POWER OUT
DMX IN
DMX OUT
1.
Connect a power cable with a Powercon TRUE1 Female connector to the
power input.
2.
Connect the other end of the power cable to a 100 – 250 Vac (50 – 60 Hz)
power source.
3.
Connect the female connector of a 5-pole DMX cable in the DMX input.
4.
Connect the other end of the DMX cable to your DMX controller.
5.
Use the display and buttons or a RDM controller to assign DMX addresses, see
chapter 1.
CAUTION
Always plug in a DMX Terminator into the DMX output. Using a
DMX Terminator improves signal reliability.
