| RENT: CONFETTI |
via GIUSEPPE DI VITTORIO 9
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSET.IT
via NAZARIO SAURO 13/A
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSETRENTAL.IT
TekSet
Rental S.r.l.
Version 1.0
Page 14
Secure the tank by turning the two
fastening buttons. Make sure to twist
these buttons properly until the tank is
entirely secured.
Always check to make sure the tank is firmly
secured.
6.
Determine the required direction for the
best effect.
5.
Screw the shot pipe on the screw thread
integrated on the tank. Turn it securely
until the end of the thread!
Check to make sure there is no more
pressure on the tank!
4.
Take the filled shot pipe from the holder
in the flight case.
3.
User documentation MAGICFX® Stadium Shot
Page 15
Activate the compressor and fill the tank
until the compressor turns off or the
manometer indicates that the pressure in
the tank is 8 bar.
Make sure that the pressure does not
exceed 8 bar!!
You may disconnect the compressor after
filling the tank.
Watch the pressure closely.
The pressure in the tank can increase in
case of high temperatures. If the pressure
exceeds 8 bar, then use the ventilation valve
to remove some air and bring the pressure
back to 8 bar (or less).
9.
Take a compressor (with a maximum
pressure output of 8 bar), which meets
the safety requirements and standards
concerned, and connect the hose to the
quick-connect coupling of the tank and
the quick-connect coupling of the
compressor.
8.
Put all 4 wheels on their brakes and
check if the entire flight case is standing
stably and securely!
Note: during a shot a backlash is created
through which the flight case can move if it
has not been properly secured!
7.
| STADIUM SHOT |
