User Documentation MAGICFX® CO2 Jet
Page 13
11. USAGE
TIP:
This provides you with suggestions and advice on how to perform tasks
in an easier or more convenient way.
CAUTION:
This indicates that the equipment may be damaged if procedures are not
carried out in the proper manner.
DANGER WARNING:
The MAGICFX® CO2 Jet may only be operated by authorized adults.
The CO2 Jet may only be operated if all parts are entire and in good
working order and properly connected/installed.
Operate the CO2 Jet as follows:
To check is the system is installed well,
push the switch of the controller in the
ON position (the CO2 Jet gets 230V) and
check if the blue LED on top of the CO2
Jet is burning.
You can also listen to the valve which is
inside the CO2 Jet. When the power is
supplied, the valve will open and a loud
clicking noise is heard.
2.
The CO2 Jet will be activated directly as
soon as it is connected to a 230V power
source.
Use a 230V on/off switch controller
between the main power supply and the
CO2 Jet and make sure the switch is in
the OFF position.
Now connect the controller to a 230V
power supply.
1.
