50
Reservation mode will be automatically cancelled, if door or trunk is open, or reservation
mode is set up. In this case you need to repeat all previous steps.
If you have set the reservation mode up, the lights on the dashboard may be on for 3
seconds after the engine is off (it is a normal procedure).
If you have set the reservation mode up, the ABS warning light may be flashing (it is a normal
procedure)
ATTENTION !
If the alarm is fitted in the car with a manual gearbox, you must set the reservation mode up when
remote starting. The manufacturer and distributor are not to be held responsible for any accident
resulting from selecting a wrong mode (automatic transmission mode) for a manual transmission
vehicle. Customer must confirm this with his/her installer and check and inspect by himself/herself.
Automatic transmission vehicles must be checked in the same manner, ensuring that the vehicle will not
be started by the key when the transmission is not in either “P” or “N”.
4.5. Vibrating mode On/Off
2x
By two short presses of button
the vibrating mode will be
activated
Acoustic signal will be deactivated.
This will be indicated by an icon
.
By pressing the button
2 times again, vibrating mode will be
deactivated and the icon will disappear. Acoustic signal will be activated again.
4.6. AUX Mode Entry On/Off
+
———
By outputs AUX 1 and AUX 2 you can operate any additional equipment in your car such as:
opening/closing the windows, turning the light on/off, and other features. Ask for more info at
your service centre.
TURNING CONTROL OF AUX OUTPUTS ON/OFF
It is necessary to enable this function before using AUX outputs.
Keep buttons
and
pressed.
Icon
will shown on display
If within 60 sec. no outputs of AUX 1 or AUX 2 will be used, AUX outputs will be
automatically turned off and the icon
will not shown.
4.6.1. Turning AUX1 On
2x
After entering AUX mode, AUX 1 output will be triggered, if button
is pressed 2 times in a row. While operating AUX 1, the remote
control will indicate that as A-01 is operating.
