33
MAGIC-PRO MP-6VIP-D
Choose Enabled (default) or Disabled. Choose Disabled when
you use an ISA card with FDD function, or choose Enabled to
use the onboard FDD connector.
Onboard FDC
Controller
Choose Auto (default), 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/
IRQ3 or Disabled. Dont set port 1 & 2 to the same value,
except when setting at Disabled.
Onboard Serial Port1
Choose Auto (default), 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/
IRQ3 or Disabled.
Onboard Serial Port2
Enabled (default): Turn on the onboard IDE function.
Disabled: Turn off the onboard IDE function.
Primary Master/Slave
UDMA
Secondary Master/Slave
UDMA
Primary
Master/Slave PIO
Secondary
Master/Slave PIO
Choose Auto (default) or Mode 0~4. The BIOS will detect the
HDD mode type automatically when you choose Auto. You
need to set to a lower mode than Auto when your hard disk
becomes unstable.
Choose Enable(default), Disabled.
IDE Prefetch Mode
The chipset contains a PCI IDE interface with support from
two IDE channels. Select Enabled to activate the first and/or
the second IDE interface. Select Disabled to deactivate an
interface, if you install a primary and/or second add-on IDE
interface.
The choice: Enabled(default), Disabled.
OnChip IDE Channel
0 / 1
This option allows you to decide to activate PCI Slot or AGP
first.
Choose PCI Slot(default), AGP.
Init Display First
