17
MAGIC-PRO MP-6VIP-D
Choose Normal or Fast (default): This option allows the RAM
to access the memory above 1MB by using the fast gate A20
line.
Gate A20 Option
Choose Enabled or Disabled (default): Enable this option to
adjust the deystroke repeat rate.
Typematic Rate Setting
Choose 250 (default), 500, 750 and 1000. This option sets
the time interval for displaying the first and the second
characters.
Typematic Delay (Msec)
Choose System or Setup (default). This option prevents un-
authorized system boot up or use of BIOS Setup.
Security Option
On (default): Activate the NumLock function at boot up.
Off: Close the NumLock function at boot up.
Boot Up NumLock
Status
Range between 6 (default) and 30 characters per second.
This option controls the speed of repeating keystrokes.
Typematic Rate
(Char / Sec)
Enabled (default): During POST, BIOS checks the track num-
ber for Floppy Disk drive to see whether its 40 or
80 tracks.
Disabled: During POST, BIOS will not check the track num-
ber for Floppy Disk drive.
Boot Up Floppy Seek
Choose Enabled or Disabled (default).
Memory Parity / ECC
Check
Choose Enabled (default) or Disabled. If your hard disk is
larger than 540MB, choose Enabled. If you are using IDE
HDD AUTO DETECTION option, then BIOS will choose this
option automatically.
IDE HDD Block Mode
Note: Some older model HDDs do not provide this feature.
