MAGIC FX MFX1201, Руководство пользователя, Страница: 20 / 24

User Manual
MAGICFX® Stage Flame
Page 19
11. USAGE
TIP:
This provides you with suggestions and advice on how to perform tasks
in an easier or more convenient way.
CAUTION:
This indicates that the equipment may be damaged if procedures are not
carried out in the proper manner.
DANGER WARNING:
The MAGICFX® Stage Flame may only be operated by authorised adults.
The Stage Flame may only be operated if all parts are entire and in good
working order and properly connected/installed.
Operate the Stage Flame as follows:
Press the flash button for the selected
“fire” channel on the DMX controller. A
flame should now be emitted from the
Stage Flame.
Before you shoot flames, always check that
there are no persons in the area near the
Stage Flame. Ensure that you have a full
view of the Stage Flame when it is flaming.
Consult the DMX controller manual for
instructions on how to operate it properly.
2.
After you have readied the Stage Flame
and set the DMX addresses properly, you
are clear to operate the Stage Flame.
You previously set a “safety” channel for
the Stage Flame so that the device should
still be in safety mode. You now take it
out of safety mode by setting the channel
to between 40% and 60%.
The Stage Flame now counts down for
three seconds while it checks the system
and activates itself for use.
The LED lighting on the back of the Stage
Flame will start blinking in turn.
1.