MAGIC FX CO2JET II, Руководство пользователя

Страница: 7 / 20

Version 1.0
Page 6
5. INTRODUCTION
5.1 DESCRIPTION AND APPLICATION OF THE CO2 POWER JET
The CO2 Power Jet is intended to electronically blow white smoke plumes of CO2 from a distance. As
soon as the CO2 leaves the cylinder through the CO2 Power Jet’s secured high-pressure hoses, it
converts into gas. This formation of gas is accompanied by a strong hissing sound and a solid white
plume of smoke will be visible. The length of this plume is on average 8 metres. This depends on the
air humidity: in case of a high degree of air humidity, the smoke plume will be larger and in case of a
low degree of air humidity it will be smaller.
The CO2 Power Jet must be connected to a carbon dioxide (CO
2
) bottle with dip pipe.
The CO2 Power Jet is not suitable for other gases than those described above.
Any use other than that described above will exclude your supplier from any liability.
5.2 NECESSARY ACCESSORIES
The following parts belong to the CO2 Power Jet:
Talel 5.1
Manual MFX0308
– Power cable
4 CO2 Bottles (with dip pipe)
4x
CO
2
High Pressure
Hose 3/8 Male - Female
4x
CO
2
Bottle
to Hose connector
CO
2
High Pressure Hose
3/ 4 Male - Female
CO
2
High Pressure Distribution Block
4x 3/8 Hose In 1x 3/ 4 Hose Out