MAGIC FX CO2JET II, Руководство пользователя

Страница: 13 / 20

Version 1.0
Page 12
5.
Place the CO2 bottles (liquid CO2 with
dip pipe) on an even and solid surface.
Place the bottles in such a position that
the valve opening does not point in the
direction of persons or objects.
Place the CO2 bottles preferably
outdoors or in a properly ventilated
space with a CO2 detection system.
CO2 bottles are pressure containers.
That is why you must secure them with
special gas bottle brackets or chains to
prevent them falling over.
4.
Now connect the 2m long high pressure
CO2 hoses to the CO2 bottles.
Firmly secure the couplings by hand.
Turning it by hand will suffice! You should
only use a wrench if the coupling continues
to leak.
3.
In order to test it, you first need to check
if the gas valve on the CO2 bottle is still
in a closed position. Now you can check
if the CO2 Power Jet has been installed
properly by switching the electricity on
and off.
If the system has been connected
properly you will hear a clicking sound
which is produced by the opening and
closing of the magnetic valve in the CO2
Power Jet.