background image

IMPORTANT SAFETY INSTRUCTIONS

 

 

 

a

WARNING

a

 

 
To reduce the risk of fire, electrical shock, 
or injury when using your appliance, follow 
these basic precautions: 

 

 

 

 

 

 

 

 

Read all instructions before using the wine cooler. 

DANGER or WARNING:

  Risk of child entrapment.   

To avoid the possibility of child entrapment, please take the following precautions 
before throwing out the appliance.   

Remove all doors from the unit. 

Leave the shelves in place so that children may not easily climb inside. 

Never allow children to operate, play with, or crawl inside the appliance. 

Refrigerants: 

All refrigeration products contain refrigerants, which under the 

guidelines of federal law must be removed before disposal of product.  It is the 
consumer’s responsibility to comply with federal and local regulations when 
disposing of this product.

 

Never clean appliance parts with flammable fluids.  The fumes can create a fire 
hazard or explosion. 
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity 
of this or any other appliance.  The fumes can create a fire hazard or an explosion. 

 

-Save these instructions- 

 

INSTALLATION INSTRUCTIONS 

 

Before Using Your Appliance 

 

Remove the exterior and interior packing. 

  Before connecting the appliance to the power source, let it stand upright for approximately 4 

hours. This will reduce the possibility of a malfunction in the cooling system from improper 
handling during transportation. 

 

Clean the interior surface with lukewarm water using a soft cloth. (Cleaning instruction on page 8) 

 
 

Free-Standing Installation 

 This

 

appliance is designed to be 

installed built-in or free standing

.

 

 

Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.). 
Direct sunlight may affect the acrylic coating and heat sources may increase electrical 
consumption.  Ambient temperature below 68°F (20°C) or above 90°F (32°C) will hinder the 
performance of this appliance.  

This unit is not designed for use in a garage or any other 

outside installation. 

 

Avoid locating the appliance in moist areas.  

  Plug the appliance into dedicated, properly installed-grounded wall outlet. Do not under any 

circumstances cut or remove the third (ground) prong from the power cord. Any questions 
concerning power and/or grounding should be directed toward a certified electrician or an 
authorized service center.  

This unit is not designed to be installed in an RV or used with an 

inverter. 

 

After plugging the appliance into a wall outlet, turn the unit on and allow the unit to cool down for 3 
~ 4 hours before placing wine bottles in the appliance. 

 

                                                                                                                                              

    EN 

3

Содержание MCWC44DZ












Отзывы: