INSTALLER CHECKLIST
The installer must have completed and checked the following:
•
The dishwasher is square and level.
•
The dishwasher is fastened securely to the cabinetry.
•
The dishwasher door opens and closes freely. The dishwasher door must close without hitting any
cabinetry or counter top.
•
The inlet water supply is turned on and checked for leaks.
•
The drain hose has been connected and checked for leaks. There must be no kinks or obstructions in
the drain hose.
•
The drain hose must be installed with a 28" (710mm) high drain loop for drain hook-ups without any
air removed.
•
If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane. If
you do not remove the entire membrane, remaining food can cause a blockage in the drain hose
spigot. Ensure a hose clamp is used to secure the hose to the spigot.
•
The spray arms are free and rotate freely.
•
The rinse cycle has been run.
•
The water level will be below the filter screen after the end of the wash program. It is normal to find
some water in the drain filter area.
FINAL INSTRUCTIONS
1. Press the On/Off button to turn the dishwasher on.
2. Power indicator light comes on.
3. Use the Program Select button to choose a washing program.
4. Start the program with the Start/Pause/Cancel button.
5. Run the dishwasher through one complete cycle. When the wash cycle is completed, use the On/Off
button to turn the dishwasher off.
SELF HELP HINTS
1. The dishwasher doesn't turn on
•
Check to make sure the breaker to the dishwasher is in the on position.
•
Check to make sure that the Supply cord is plugged.
2. No water being supplied
•
Make sure the water shut-off valve is in the ON position.
3. Water does not drain
•
Make sure drain hose is not kinked or comes out of air gap next to the sink.
•
Remove drain hose from disposal and make sure plug is removed.
NOTE:
If your dishwasher is not operating properly after following these steps, please contact customer
service at 888-775-0202.
The manufacturer warranty does not cover installation, conversion or customer education service visits.
13