Magic Chef MCBC58DST Скачать руководство пользователя страница 9

Changing The Inner Light 

 

Before removing the inner light, turn off the appliance first and then unplug the unit from the wall 
outlet.  Failure to do so could result in electrical shock or personal injury. 

 

Use Phillips screwdriver to take out the screw. 

 

Remove the transparent light cover gently. 

 

Pull out the existing light bulb by unscrewing it counter-clockwise. 

 

Insert new light bulb (E12, max. 15W) by screwing it in clockwise. 

 

Replace the transparent light cover and tighten screw. 

 

Automatic Defrost 

 

There is no need for manual defrosting of this appliance due to automatic defrosting function.   

 

The ice build-up on the inner back wall during compressor operation will be automatically 
defrosted once the compressor cycle is off. 

 

Defrost water will drain out passing through the drain outlet in the inner back wall into a drain pan 
located above the compressor, from where it evaporates. 

 
 
 

CHANGING THE REVERSIBLE DOOR 

 
 
This appliance is built with a reversible door.  You have the choice of either opening it from the left or 
the right side.  In order to reverse the opening direction of your door, please follow these simple 
instructions.  

NOTE: If desired, please change the door swing prior to appliance installation.

 

 

Caution: To avoid personal injury to yourself and/or property, we highly recommend that 
someone assist you during the door reversal process. 
 
 
 

1)  Remove the top hinge assembly and keep 

them for later use. 

 

2)  Remove the bottom hinge assembly and 

keep them for later use. 

3)  Remove the plug buttons from the upper left 

holes and transfer them to the uncovered 
holes on the right side.  Be sure to press the 
plug buttons firmly into the hole. 

4)  Re-install the top hinge assembly previously 

removed in step 1 on the opposite side. 

5)  Re-install the bottom hinge assembly 

previously removed in step 2 on the 
opposite side. 

6)  Re-install the door assembly with the door 

handle on the opposite side.  (Rotating the 
door assembly 180°). 

7)  Ensure that the door assembly is properly 

aligned with cabinet before tightening the 
screws. 

 

 

 
 
 

                                                                                                                                              

    EN 

8

Содержание MCBC58DST













Отзывы: