OPERATING YOUR APPLIANCE
MCWC50DST: Wine Cooler
•
The temperature range of the wine cooler is for 39°F ~
64°F (4°C ~ 18°C) +/- 5°F.
•
Temperature
Recommendations:
Red Wine:
54°F ~ 61°F (12°C ~ 16°C)
White Wine:
43°F ~ 50°F (6°C ~ 10°C)
•
The display indicates the average temperature of the appliance at the moment.
Pre-Set Wine Zones
•
Press the “RED” or “WHITE” pads to choose preset storage conditions for either red or white
wine. (The indicator light “RED” or “WHITE” will illuminate accordingly.)
•
The programmed temperature for red or white wine will be displayed for a few seconds.
Manual Temperature Setting
•
The temperature of the wine cooler can be set anywhere between 39°F ~ 64°F (4°C ~ 18°C) by
pressing temperature up
▲
and temperature down
▼
pads as follows:
1) Press the [SET] pad until you hear a “Beep” sound (approximately 2 seconds).
2) Press
the
▲▼
pads to increase or decrease the desired temperature in increments of
one degree.
3) Press the [SET] pad to confirm your desired temperature setting. If no pad is pressed
within 10 seconds, your select temperature setting will be automatically confirmed.
NOTE:
•
To select temperature display between Celsius (°C) or Fahrenheit (°F), press the “
▲
” pad for
approximately 2 seconds.
MCBC58DST: Beverage Cooler
•
The temperature range of the beverage cooler is for 39°F ~
54°F (4°C ~ 12°C). +/- 5°F.
•
The display indicates the average temperature of the
appliance at the moment.
NORMAL Temperature Setting
•
When the appliance is switched on, or the “NORMAL” pad is pressed, the appliance runs on the
temperature setting of 45°F (7°C) and the “NORMAL” indicator light will be illuminated.
Manual Temperature Setting
•
The temperature of the beverage cooler can be set anywhere between 39°F ~ 54°F (4°C ~ 12°C)
by pressing temperature up
▲
and temperature down
▼
pads as follows:
1) Press the [SET] pad until you hear a “Beep” sound (approximately 2 seconds).
2) Press
the
▲▼
pads to increase or decrease the desired temperature in increments of
one degree.
3) Press the [SET] pad to confirm your desired temperature setting. If no pad is pressed
within 10 seconds, your select temperature setting will be automatically confirmed.
NOTE:
•
The “MANUAL” indicator light will be illuminated while you are manually setting the temperature
on the beverage cooler.
•
To select temperature display between Celsius (°C) or Fahrenheit (°F), press the “
▲
” pad for
approximately 2 seconds.
The following is applicable to both MCWC50DST and MCBC58DST:
•
The indicator will remain ON during refrigeration cycle and will be OFF during
idle cycle.
•
To switch the Interior light ON/OFF, press the pad.
EN
7
