Maggi 16430201, Оригинальное руководство по эксплуатации и техническому обслуживанию

Страница: 18 / 56

14. WORKING AREA
To use the machine properly, the areas indicated in the picture below must be left free.
Page
14
Never leave the machine unattended when
connected to the electrical power supply
15. ASSEMBLY AND PRELIMINARY PREPARATION FOR SET UP
The machine is delivered partially assembled, so it is necessary to mount all those parts left not assembled
for packaging reasons.
The buyer must verify that all the machine parts are safe and not damaged after transportation, before going
on with assembling.
In particular we suggest to verify the most delicate parts, as electrical or mechanical components, pneumatic
tubing or the safety protection devices of the machine itself.
After assembling, it is necessary to clean all surfaces from protective oil so that the working pieces remain
clean during working operations.
SAWDUST REMOVAL
The removal of sawdust and wood scrap, has to be effected in accordance to the current rules of the country
where the machine is installed.
We suggest to ask the qualified body of the country where the machine is installed for the rules concerning
this removal to know exactly how to behave properly.
16. MACHINE CONNECTION TO EXTERNAL POWER SUPPLY
After machine assembling and installation, connect it with:

Electrical power supply

Pneumatic power supply

Dust suction system
ATTENTION: THE MACHINE IS DELIVERED WITHOUT EXHAUST SYSTEM. THE
USER HAS TO INSTALL A PROPER EXHAUST FAN DEPENDING ON THE TYPE OF
USE, THE MATERIAL AND THE TIMING OF USE OF THE MACHINE. THIS SYSTEM
HAS TO KEEP THE DUST CONCENTRACTION BELOW THE VALUE ALLOWED BY
THE LAW OF THE COUNTRY WHERE THE MACHINE IS INSTALLED.