Installation
MultiView™ II T4 Installation and User Guide
8
At the receiver end (these steps are generic - refer to the appropriate receiver manual):
1. Connect the VIDEO OUTPUT connector to the display, and attach any audio (AUX I/O)
and/or serial connections depending on the model of MultiView™ receiver and option
module installed.
2. Connect the CAT5 cable to the LINK IN connector. If you are daisy-chaining multiple
receivers, also connect the downstream CAT5 cable to the LINK OUT port on the
receiver.
3. Apply power to the receiver.
a. The power-on LED should turn on.
b. The status-LED should turn on (Green).
4. Make any required configuration changes via the LED/button user-interface, if the
receiver is equipped with this capability.
5. Adjust the receiver’s EQ and/or SKEW (optional) settings. If this adjustment is not
made, it can result in a poor or no image on the display.
