Magellan ProMark 500, Руководство по началу работы, Страница: 38 / 42

English
34
• Set the following parameters:
– Elevation Mask in degrees.
– Check the antenna height value. If it’s wrong, tap the
Change Ant.
button to set the new value.
– Storage medium (internal or USB memory stick).
Choosing the internal memory is recommended. The
use of a memory stick should be restricted to
downloading raw data files.
– Logging interval in seconds.
• Tap . This starts data logging. From the screen then
displayed, you can do the following:
– Mark a particular point or event in the file (
Tag New
Site
)(cf. Stop & Go surveying).
– Stop data logging (
Close File
).
– Access the File Manager window in read-only mode
(
File Manager
).
–
Continue Logging
/
Pause Logging
. Pausing data logging
means closing the currently open file. Continuing data
logging means opening a new file. Data logging will
start immediately based on the parameters set for the
previous file.
Combining the two Methods
Combining the two methods is possible.
For example, you can start data logging using FAST Survey.
Then you can quit FAST Survey and turn off the field terminal
without disturbing data logging. Later, you will be allowed to
stop data logging by simply pressing the Log button on the
ProMark 500 front panel.
Downloading Raw
Data
Use a USB mass storage device as a transit storage medium
to download raw data from the ProMark 500’s internal
memory to your office computer.
After downloading the files to this device, connect the USB
device to your computer and use your usual browser to copy
the files to the project folder.
• Connect the USB mass storage device to the ProMark 500
via the short USB Device cable provided (P/N 702103).
If raw data files are present in the ProMark 500’s internal
memory, the following icons will automatically appear on
the display screen: