Magellan ProMark 500, Руководство по началу работы, Страница: 22 / 42

English
18
RTK Rover Setup
Prerequisites
• Use a range pole fitted with a 5/8” male adaptor at the
upper end (not provided).
• If a radio link is used with the base, your rover should
normally have been fitted with the radio module that
matches the reception band covered by the radio
transmitter used at the base.
• If a GPRS connection is used, your rover should normally
have been fitted with the SIM card that will allow it to
perform a network connection.
To connect the SIM card, first use a flat screwdriver to
loosen the two quarter-turn screws securing the radio
module. Remove the module. This gives access to an
electronic card on which you can insert the SIM card as
shown on the picture.
Radio Link
Mount the different items as shown on the picture, including
the ProMark 500
[1] , the radio antenna [2] , the range pole
[3] and the field terminal with its mounting bracket [4] .
GSM/GPRS
Connection
As a standard feature, the ProMark 500 incorporates a built-
in GSM module, which means you only have to connect the
GSM antenna if you have paid for activation of the hardware.
Mount the different items as shown on the picture, including
the ProMark 500
[1] , the GSM antenna [2] , the range pole
[3] and the field terminal with its mounting bracket [4] .
[1]
[2]
[3]
[4]
[1]
[2]
[3]
[4]