Magellan MARS-1-2-4-6, Руководство пользователя

Страница: 22 / 51

3.6Working with Tags
Do not stack ItemTags on top of each other. Only
StackTags can be stacked, overlapped or touch
each other.
Single-axis Readers are tag orientation sensitive.
Refer to the Tag-to-Reader/Tag-to-Antenna
section of this document.
Reading and writing speeds depend on reader-
tag communication speeds, the number of
receiver channels, amount of information to be
read and/or written and the number of tags
presented at a time. The additional number of
tags and information to be read and especially
written slows down the read-write communication
speed. Please consult Magellan or your support
organisation regarding these issues for your
specific application.
Be aware that tags and Readers can be
incompatible with each other. Larger tags can
work with all types of Readers. Smaller tags
require higher field strengths and as a result they
may not operate with some Readers or have to be
closer to a Reader antenna to operate. Refer to
the Reader-Tag Compatibility section of this
document.
StackTag tags delivered on a roll are always fully powered ( ST normal
power mode or 6000 mode). Fully or normal powered tags are ON all the
time and reply to each Reader command providing they are in the field of
the Reader antenna.
To decrease tag clashing and increase anti-collision and stackability for
some applications the tags can be reconfigured by end-users to a ¼ low
power mode (
ST ¼ normal power mode or 2000 mode). This means that
tags in the ¼ low power mode are muted ¾ of the time and do not to reply to
the Reader commands instantly.
Tags can be reconfigured individually (one by one) or on mass (many at
once).
Before reconfiguring tags make sure the
ReaderManager software has been installed and
upgraded to the latest version, the Reader is
running and the Reader is
Connected to the
ReaderManager software .
How to reconfigure tags individually or on mass
1. In the ReaderManager go to Tools -> System -> Console. C lick with
the right mouse button and tick Show Tag Replies .
2. Then go to Reader Configuration and choose
Config_Normal_Powered_Tag or Config_Quarter_Powered_Tag
(for the ReaderManager version 2.12 or higher).
3. Place a single tag or multiple tags into the reader antenna field.
4. Take the tag/tags off the reader.
5. Follow the step 3 to 4 for a new batch of tags.
6. Once completed go to Reader Configuration and click on Clear All .
MARS-1-2-4-6 USER MANUAL 64-70-017-DOC ver.1 18