Changing the Destination Leg of an Active Route
When a route is created it can have many different legs to it, each leg with its own
destination. If during your travels you want to skip some of the legs, you can select the leg
that you want to proceed to next.
An example would be that your planned route starts at your campsite. The first leg goes to
the bridge. The second leg goes across the bridge to the stone marker. Leg 3 leaves the
stone marker and takes you to the ranger station. To finish out the route, the final leg goes
from the ranger station to the swimming area. This route would be
Camp > Bridge > Marker
> Ranger > Swim.
Suppose that after crossing the bridge you don’t want to go to the stone
marker but instead you want to go to the ranger station. Because the route is active (you can
only select legs from active routes), you would follow the instructions below and tell the
eXplorist to set the next leg to the ranger station. The route would be recomputed,
eliminating the navigation instructions to go to the stone marker.
1.
Press
MENU
.
2.
Use the
Arrow
joystick to highlight
Routes
.
3.
Press
ENTER
.
4.
Use the
Arrow
joystick to highlight the active route.
5.
Press
MENU
.
6.
Highlight
Select Leg
.
7.
Press
ENTER
.
8.
Use the
Arrow
joystick to highlight the next destination POI
from the route list that you want to go to. In the example to
the right, that would be
Ranger
.
9.
Press
ENTER
.
10. Confirm that you want to do this by using the
Arrow
joystick
to highlight
Yes
.
11. Press
ENTER
.
12. Press
NAV
to return to the last viewed navigation screen.
Routes
44
Enter to Select
Camp
Bridge
Marker
Ranger
Swim
Leg
Bearing Distance
3
272°
3.06
M
M
I
Route leg list with
Ranger
selected. Note that
Marker
is
bold
because it
is the current active leg.
