Viewing a Preloaded POI on the Map Screen
POIs that have been preloaded as part of the background map can be viewed on the
Map
screen to assist you in locating the POIs.
1.
Press
MENU
.
2.
Use the
Arrow
joystick to highlight
Pts of Interest
.
3.
Press
ENTER
.
4.
Use the
Arrow
joystick up/down to highlight
Background Map
.
5.
Use the
Arrow
joystick left/right to select
Nearest
or
Alphabetical
.
6.
Press
ENTER
.
7.
[Only if Alphabetical selected] Use the
Arrow
joystick and the
ENTER
button to
enter the first few characters of the POI you are searching for. Highlight
OK
and
press
ENTER
to continue.
8.
Use the
Arrow
joystick to highlight the POI to be viewed.
9.
Press
ENTER
.
10. Use the
Arrow
joystick to highlight
View
.
11. Press
ENTER
.
12. The
Map screen will be displayed in the Cursor mode. The cursor will be directly
over the POI you have selected. You may use the
Zoom
buttons to change the scale
of the map displayed; and if your position icon is within range, it will be shown.
13. Press
ESC
to return to the detail screen of POIs found in step 8.
Note: Remember that pressing the
NAV
button will return you to the last viewed
Map
screen. In step 13 if you are finished with the POIs in the POI database, you could
press
NAV
to close the POI database and return to the last viewed
Map screen.
Points of Interest
36
