29
Changing North Reference
The GPS Blazer12 uses magnetic north as a default reference
for all navigation computations. You can change this to true
north (good if you are also using a map) or back to magnetic
north (default, good to use if you are using a compass) under
the SETUP menu. Press the
MENU
key until SETUP is
displayed at the top of the screen and press
ENTER
. Use the
RIGHT ARROW until SETUP NORTH REF is displayed.
Press
ENTER
again, the north reference begins to flash. Use
the RIGHT/LEFT ARROWs to scroll between MAGNETIC
and TRUE and press
ENTER
to select.
Initializing the Receiver (EZSTART)
If you desire to re-initialize the receiver, (for example, you
have moved more than 300 miles since the last time the
receiver was turned on) you can do so in the SETUP menu.
Press
MENU
until SETUP is displayed at the top of the screen
and press
ENTER
. Use the RIGHT ARROW until SETUP
PRESS ENT TO EZSTRT is displayed. Press
ENTER
again
and the receiver prompts you to enter the necessary data.
SELECT REGION.
Use the ARROW pad to change the
flashing text to select the appropriate region for your present
location. Press
ENTER
.
Содержание Blazer12
Страница 1: ...GPS lazer12 User Manual User Manual...