Assembly Instructions
Page 6 of 9
Step 3:
● Match the lower leg rod with the color-coded rod
and the same color connector.Insert and bend
the leg rod into the corresponding plastic hole,
and make the metal spring connect and lock the
position of the rod
(Fig. 7) (Fig. 8).
● Hook the plastic hook on the inseam to all
pins
(Fig. 9).
Step 2:
● The plastic hook that sews the roof to the
S-shaped table hooks onto the iron bar
(Fig. 4).
●
Match the beam leg rod tube with the color-coded
rod and the same color connector. Insert and
bend the rod tube into the corresponding four-way
plastic part hole, so that the metal spring connects
and locks the position of the rod. Hang the S-shaped
iron hook on top of the plastic
(Fig. 5).
●
Match the middle position beam leg rod tube with
color-coded rod and the same color connector.
Insert and bend rod tube into the corresponding
five-way plastic piece hole, so that the metal spring
connects and locks the position of the rod. Hang the
S-shaped iron hook on top of the plastic
(Fig. 6).
FIGURE 4
FIGURE 5
FIGURE 7
FIGURE 6
FIGURE 9
FIGURE 8
