MAG P2, Руководство пользователя

Страница: 14 / 16

14
4. The HI LED shows the current parameter value.
Parameter Value Indication Factory Setting
SPEED
LO LED
blinking 1x,
then pause
-3 (Slower) HI LED blinking 1x, then pause
-2 HI LED blinking 2x, then pause
-1 HI LED blinking 3x, then pause
0 Standard 122 HI LED always blinking A, B
+1 (Faster) HI LED constantly on
BALANCE
LO LED
blinking 2x,
then pause
-2 (Highs Cut) HI LED blinking 1x, then pause A
-1 HI LED blinking 2x, then pause
0 (No Cuts) HI LED blinking 3x, then pause B
+1 HI LED always blinking
+2 (Lows Cut) HI LED constantly on
DRIVE
LO LED
blinking 3x,
then pause
1 (OFF) HI LED blinking 1x, then pause A
2 HI LED blinking 2x, then pause
3 HI LED blinking 3x, then pause
4 HI LED always blinking B
5 HI LED constantly on
DISTANCE
LO LED
always
blinking
1 (Close) HI LED blinking 1x, then pause
2 HI LED blinking 2x, then pause
3 HI LED blinking 3x, then pause A
4 HI LED always blinking B
5 (Far) HI LED constantly on
MODE
LO LED
constantly on
Cabinet Simulation
OFF (Guitar Mode) HI LED blinking 1x, then pause
Cabinet Simulation ON
(Keyboard Mode) HI LED constantly on A, B
To select the next value, press the VENT SPEED (2 LEDs unlabeled) button once. After reaching
the last (maximum) value, the next button press will select the first (minimum) value again.
5. Toggle the PRESET A-B tab if you wish to edit the other preset also, and repeat the previous
steps.
6. When editing is finished, press the VENT and VENT SPEED (2 LEDs unlabeled) buttons
simultaneously and hold them for at least 2 seconds. Settings will be stored, and the mini VENT
will return to play mode (effect on, slow speed).