Installation
1 .
Plug in the power supply into the wall. Do NOT plug BOX into this yet.
2.
Put the batteries in the remote
3.
Plug the HDMI cable into the box and into an available HDMI Port on your TV. Switch your TV to
the appropriate HDMI, for example HDMI 1, 2 or 3
4.
If you have the optional WIFI dongle plug into the USB port in the front or back of the BOX. If
you are using the included Ethernet cable, plug one end of the cable into the BOX and the other
end into your Internet router.
5.
Plug the power cable into your BOX
● NOTE: If you are using the Ethernet cable, and if your internet is working and you have
connected all cables correctly, the BOX will begin it’s boot sequence. This takes
approximately 2 minutes to complete. Once the BOX is completely booted, it will load the
main menu ribbon. Select
TV
and then
ALL
. If the BOX does NOT boot, or if you get any
errors, then please see the troubleshooting section in this guide.
If you are using a WIFI dongle, then please go to the WIFI connectivity page in this guide.
-
4
