MAG TOOLS MPF980381, Оригинальное руководство пользователя

Страница: 24 / 120

22
EnGLIsh
IMPORTANT SAFETY INSTRUCTIONS FOR ALL
BATTERY CHARGERS
WARNING: Shock hazard. Do not allow any liquid to
get inside charger. Electric shock may result.
CAUTION:
Under certain conditions, with the charger
plugged into the power supply, the charger can be shorted
by foreign material. Foreign materials of a conductive
nature, such as, but not limited to, grinding dust, metal
chips, steel wool, aluminum foil or any buildup of metallic
particles should be kept away from the charger cavities.
Additional safety instructions for
pneumatic tools
•
Compressed air can cause severe injury.
•
Always shut off air supply, and disconnect tool from air
supply when not in use.
•
Always disconnect tool from compressed air supply
before changing accessories, making adjustments and/
or repairs, when moving away from an operating area
to a different area.
•
Keep fingers away from trigger when not operating
the tool and when moving from one operating position
to another. Never direct compressed air at yourself or
anyone else.
•
Whipping hoses can cause severe injury.
Always check for
damaged or loose hoses or fittings.
•
Never carry a pneumatic tool by its hose.
•
Never drag a pneumatic tool by its hose.
•
When using pneumatic tools, do not exceed the
maximum operating pressure PSI max (max. PSI, bar
or kPa).
•
Pneumatic tools should only be powered by compressed
air at the lowest pressure required for the work process
to reduce noise and vibration and minimise wear.
•
Using oxygen or combustible gases for operating
pneumatic tools creates a fire and explosion hazard.
•
Never use oxygen or combustible gases for operating
pneumatic tools. These gasses create a fire and
explosion hazard.
•
Be careful when using pneumatic tools as the tool could
become cold, affecting grip and control.
•
Gloves can become entangled with the rotating drive,
causing severed or broken fingers.
•
Rotating drive sockets and drive extensions can easily
entangle rubber-coated or metal-reinforced gloves.
•
Hold the tool correctly; be ready to counteract normal or
sudden movements and have both hands available.
•
Maintain a balanced body position and secure footing.
•
Do not use in confined spaces and beware of crushing
hands between tool and workpiece, especially
when unscrewing.
•
Use only accessories recommended by MAC Tools.
Always unplug the charger from the power supply when
there is no battery pack in the cavity. Unplug the charger
before attempting to clean.
•
SAVE THESE INSTRUCTIONS -
The manual contains
important safety and operating instructions.
•
Before using charger, read all instructions and
cautionary markings on charger, battery pack, and
product using battery pack.
•
DO NOT attempt to charge the LED Light Accessory with
any chargers other than class 2 chargers.
Class 2 chargers
and the LED Light Accessory are specifi cally designed to work
together.
•
Do not expose charger to rain or snow.
•
Pull by plug rather than cord when disconnecting
charger.
This will reduce risk of damage to electric plug
and cord
•
Make sure that cord is located so that it will not be
stepped on, tripped over, or otherwise subjected to
damage or stress.
•
Do not use an extension cord unless it is absolutely
necessary.
Use of improper extension cord could result in risk
of fire, electric shock, or electrocution.
•
When operating a charger outdoors, always provide
a dry location and use an extension cord suitable for
outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
•
Do not operate the charger if it has received a sharp
blow, been dropped or otherwise damaged in any way.
Take it to an authorized service center.
•
Do not disassemble the charger; take it to an authorized
service center when service or repair is required.
Incorrect
reassembly may result in a risk of electric shock, electrocution
or fire.
•
Disconnect the charger from the outlet before
attempting any cleaning.
This will reduce the risk of electric
shock. Removing the LED Light Accessory will not reduce this
risk.
•
NEVER attempt to connect 2 chargers together.
•
The charger is designed to operate on standard 120V
household electrical power.
Do not attempt to use it on any
other voltage. This does not apply to the vehicular charger.
Date Code Position (Fig. A)
The date code 2 , which also includes the year of manufacture,
is printed into the housing.
Example:
2022 XX XX
Year and Week of Manufacture
Components (Fig. A)
1
Variable speed trigger