-24-
2.4
Emissions
The declared noise emission values have been measured in accordance with DIN EN 62841-1 and may be
used for comparing the tool with another and also in a preliminary assessment of exposure.
Danger
The noise emissions during actual use of the power tool can differ from the declared
values depending on the ways in which the tool is used especially what kind of
workpiece is processed.
Always wear hearing protection, even when the power tool ist running idle in addition
to the trigger time!
2.4.1
Noise emission specifications
Noise emission values determined according to EN 62841:
Sound power level
Workplace-related emission value
Idling
111 dB (A)
100 dB (A)
Machining
108 dB (A)
97 dB (A)
2.4.2
Vibration specifications
The typically assessed acceleration is 3.2 m/s
2
.
2.5
Scope of supply
Carpenter's chain saw ZSX Ec complete with:
260 HM
400 HM
400 Q
Guide rail
Special 260
Special 400
Special 3/8“ 400
Riving knife/splitter
260
400
400
Saw chains
2 x special
18 mm HM
2 x special
18 mm HM
2 x 3/8“ cross and
longitudinal cut
1 parallel guide fence
1 service tool in bracket on the machine
1 operating manual
1 folder “Safety Instructions”
2.6
Safety devices
Danger
These devices are required for the
machine's safe operation and may
not be removed or rendered
inoperative.
Before operating the machine,
check the safety devices for
function and possible damage. Do
not use the machine with missing
or ineffective safety devices.
The machine is equipped with the following safety
devices:
-
protective equipment above the base plate
-
bottom deflection with guard plate
-
special design of the saw chain
-
riving knife/splitter
-
large base plate and parallel stop
-
handles
-
index mechanism with lock and brake
2.7
Use according to intended purpose
The carpenter's chain saw is exclusively suited for
longitudinal and cross cutting of solid wood up to a
maximum thickness of 400 mm (15 3/4 in.)
exclusively using the special saw chain provided by
