LS103Ec
12
02/2022
4.3
Mounting the cutting chain assembly
The cutting chain assembly consists of:
-
Guide rail (6)
-
Cutting chain (9)
-
Sprocket wheel (10)
Fig. 3: Parts of the cutting chain assembly
Use the following procedure to mount / replace
the cutting chain assembly:
1.
Pull out the power plug of the machine.
2.
Put down the cable where you can see it.
3.
Using the 4-mm [0.16-in] Allen key attached to
the machine, turn the threaded pin (11) to
release the tension of the cutting chain.
Fig. 4: Releasing the tension of the cutting chain
4.
Loosen the two knurled screws (3) at the
same time and remove the chain guard (12).
5.
Using the 8-mm [0.32-in] Allen key attached to
the machine, turn the fillister head screw (13)
counterclockwise to loosen it.
Fig. 5: Removing the chain guard
