K65cc/KSS60cc
01/2022
17
6.
To move the movable guard to the maximum
open position, either use the pre-feed lever
(12) or do it manually.
➢
To remove the saw blade, manually hold
the guard in the open position.
Fig. 8: Opening the guard
7.
Turn the disconnected machine onto the motor
unit. The saw blade points upward.
8.
Insert the Allen key (B) into the flange screw
(13) and turn it
counterclockwise
until the
saw shaft locks into place.
➢
The saw blade is retained in position and
the flange screw can be released.
9.
Using the Allen key (B), turn the flange screw
(13)
counterclockwise
to loosen it.
10.
Remove the flange screw (13) and the front
clamping flange (14).
11.
Remove the old saw blade.
➢
Clamping flanges must be free of
adhering parts!
➢
The new saw blade can now be installed.
Fig. 9: Removing the old saw blade
