Maestro MR600, Руководство пользователя

Страница: 13 / 44

13
ATTENTION! Do not wash filters in a washing machine or
dishwasher and do not dry it with electric heaters.
Do not use the vacuum cleaner without filters or with dirty filters.
Possible deviations in the operation of the apparatus, their
causes, and methods of resolvent
In the operation of any electrical apparatus, deviations that are not
related to a malfunction and which are not a malfunction.
Before contacting a service center, check your apparatus for similar
situations as shown in the table.
Deviation from
normal operation
Possible reason Resolvent
Vacuum cleaner does
not work at all
The vacuum cleaner is not
connected to the electricity
mains, the outlet has no
voltage
Plug the power-line cord
into an outlet, check the
outlet (for example, plug
the lamp into it).
The vacuum cleaner
works, but the suction
is weak
The air flow regulator on
the hose handle is open
Close the flow regulator
The power (speed)
regulator is at the minimum
position.
Add engine speed with
the regulator.
The object or litter is stuck
in the hose or conductor
and blocked the air
Disconnect the hose from
the vacuum cleaner and
take off the conductors,
then remove any trapped
debris.
The garbage bag is full and
/ or the filters are dirty. (The
lights for filling are red).
Clean or replace the
garbage bag and filters
Filters
are not installed properly.
Install the filters correctly.
The cover or container
does not fit.
The container is not
properly assembled or
installed.
Assemble and install the
container correctly.
Whistling during
the operation of the
vacuum cleaner (the
first few hours of
operation).
It is not a malfunction
The whistle usually
disappears after some
time in use.
EN