Maestro MR350, Руководство пользователя

Страница: 14 / 76

14
Descaling
Different water sources contain minerals and substances that sediment
on the internal surfaces of the generator and can lead to blockage
of steam flow or breakdown of the generator. To reduce scaling, it is
recommended to use distilled or demineralized water.
To remove the sediment (scale), do the following:
1. Turn off the appliance and unplug it from the outlet.
2. Disconnect the hose and stand from the appliance.
3. Drain the water from the tank and reservoir of the appliance.
4. Make a solution consisting of 50% vinegar or citric acid and 50%
water.
5. Slowly pour the solution into the appliance reservoir through the hose
hole.
6. Turn on the appliance and let it operate for 5-6 minutes.
7. Allow the appliance to cool for at least 30 minutes. Drain the solution
from the appliance through the drain valve.
8. Completely drain the remaining solution through the hose hole by
turning the appliance upside down over the sink.
9. Pour clean water into the hose hole or inlet of the tank, then drain the
water. Repeat this procedure until the smell disappears.
10. Assemble the appliance.
ATTENTION!
If this procedure fails to return the appliance
to normal operation, contact a service center.
Storage
- Before storage, unplug the appliance and allow it to cool.
- Drain the water from the tank and reservoir of the
appliance.
- Wrap the hose once around the stand, place the steam
tip on the stand hook, as illustrated in Img.10.
Picture 10