Maestro MR 925, Руководство пользователя, Страница: 8 / 52

8
of outlet grid, and 50 cm in all directions from walls, furniture and
similar objects.
Attention!
Any objects (paper, cloth, packaging materials etc.) preventing
air intake shall not be located near by the heater. Do not put the
heater on carpets with high fur.
- Do not position the heater in front or immediately below, a wall
socket.
- Do not use the appliance in rooms less than 4m² areas.
- Before connection the plug to the mains make sure that the
device switch is set into «O»- «OFF» position.
Attention!
When switched on for the first time a slight odor might be
emitted for a few minutes. This is harmless and occurs with
most heaters when any slight traces of dust or lubricants that
may have collected in the factory are heated away.
The operation symbols meaning
Operation Switch
Switch positions:
“O”- fan and heating OFF
“ ” - Fan only, no heat
“I” - Low heat output, low power
“II”- High heat output, full power.
The appliance tilt or leave the ground, power will cut off
automatically.
Thermostat
“min” (thin end of mark) the minimum room air temperature
“max” (thick end of mark) the maximum room air temperature
Operation
Plug the heater into a suitable power outlet [observing all the