INSTALLATION OF THE UNIT
Carefully place both chimneys on top of the hood.
NOTE: Slightly slide up the upper chimney to avoid
damaging it.
Slide a 6" metal round duct over the adapter/damper (Fig. 2). Use metal foil duct tape to seal the joint.
Plug hood power cord into the outlet.
Slide up the upper chimney until it is aligned with its mounting bracket. The bracket must be inside the
chimney.
Secure the upper chimney to its bracket using 2 -M4x16- mounting screws (Fig. 3 and 4).
Remove protective plastic film covering the chimney and the hood.
Fig.1
Fig.2
Fig.3
Fig.4
Upper
chimney
mounting
bracket
Lower
chimney
20
Upper chimney mounting
bracket-front view
Upper
chimney
Upper
chimney
