79 Maestro E200 Series
www.maestro-wireless.com
18 Appendix
18.1 Default settings
The following tables list the default settings for the E200 Series router.
LAN (MANAGEMENT)
Static IP Address:
192.168.1.1
Subnet Mask:
255.255.255.0
Default Gateway:
192.168.1.1
ADMIN MANAGER ACCOUNT
Username:
admin
Password:
admin
18.2 Reset to factory default setting
Restoring factory defaults will reset the E200 Series router to its factory
default configuration. You may encounter a situation where you need to
restore the factory defaults on your E200 Series router such as:
You have lost your username and password and are unable to login to
the web configuration page
You are asked to perform a factory reset by Maestro support staff.
There are two methods you can use to restore factory default settings on your
E200, using the web-based user interface or using the reset button on the
side of the router.
18.2.1
Using the web-based user interface
To restore your router to its factory default settings, please follow these steps:
Open a browser window and navigate to the IP address of the router (default
address is http://192.168.1.1). Login to the
router using
admin
as the User
Name and
admin
as the password.
Click the
System
item from the top menu bar, then
Backup / Flash Firmware
and then under
Flash operations
select the
Actions
tabs.
Under the
Actions
tabs, click the
Perform reset
button. The router asks you
to confirm that you wish
to reset all changes. Click OK to continue. The
router will erase the configuration partition and reboot.
18.2.2
Using the reset button on the side of the router
Use a pin to push the Reset button on the device for 10 seconds. The router
will restore the factory default settings and reboot.
