62 Maestro E200 Series
www.maestro-wireless.com
14.3 Wi-Fi as Client
In Client mode, the router will act as a client to existing wireless networks. The
router will accept the Internet access through wireless access provided by
another network and then distribute the access to the machines connected to
the router on its LAN interface.
At any point of time, the router can work either in client mode or in Master
mode. To change from Access Point mode to client mode, you have to
remove all networks in Access Point mode.
Under
Network > Wi-Fi
click on
Scan.
Select the Wi-Fi network you want to join and click
Join Network.
ITEM
DEFINITION
WPA passphrase
Enter the WPA pass phrase for the chosen network.
Create / Assign firewall-
zone
Assign this network to firewall zone. Since you want your
router to work in client mode, the internal network is
connected on LAN so the firewall must be on the WAN
side. Alternatively you can create your own firewall zone.
