3. STARTING AND STOPPING THE ENGINE
[1] STARTING THE ENGINE WITH MAIN STARTER SWITCH
1. Push the acceleration lever upward to operate the engine at medium speed (lever stroke about midway).
2. Insert the key and turn it left (preheating) for about four seconds or until the glow lamp light goes out.
3. Turn the key to the right to start the crane.
[2] STOPPING THE ENGINE WITH MAIN STARTER SWITCH
1. Pull the acceleration lever downward and change the engine speed to low idling.
2. Turn the main starter switch key to the OFF position. The engine stops.
[3] STARTING THE ENGINE WITH AUXILIARY STARTER SWITCH
1. Insert the key into the main starter switch and turn the key to the ON position.
2. Pull back the acceleration lever toward you to operate the engine at medium speed (lever stroke about midway).
3. Push the auxiliary starter switch up to the START position (upward) until the machine starts. Then release the starter
switch and it will return to the neutral position.
[4] STOPPING THE ENGINE WITH AUXILIARY STARTER SWITCH
1. Push the acceleration lever forward and change the engine speed to low idling.
2. Push the auxiliary starter switch down to the STOP position (downward). The engine stops.
3. Turn the main starter switch key to the OFF position.
4. TRAVELLING OPERATION
[1] STARTING/MOVING MACHINE
To start travelling, put the travel lever stand to the TRAVEL position
(upwards).
To move the machine, there are two levers which work independently.
The left lever operates the left rubber track, the right lever operates the right
rubber track.
• To move forward, push both levers to the front.
• To move backward, pull both levers to the back.
[2] CHANGING PATH OF MACHINE
[3] STOPPING/PARKING MACHINE
Changing the machine direction
while being stopped
Changing path while moving
Forward/Backward
Spin turns
Return the left and right travelling levers to the NEUTRAL position at the same time. The brakes are automatically
applied and the machine will stop.
-4-
