3
madVR Envy
–
JVC Setup Guide
Copyright © madVR Labs, LLC. All rights reserved.
JVC Configuration
The following steps are recommended to best configure the JVC for use with the Envy:
1.
Set the Input Level to “16
-
235 (Video)” as shown below. Selecting “Auto” should also work, as it
will normally select video levels. However, there have been cases where the JVC selects the
wrong levels when set to Auto. Therefore, we find it is generally best to force it to video levels,
so you do not need to worry about it being wrong on occasion.
2.
Set the Picture Mode for use with SDR conte
nt. Some users like to use a “Custom” Gamma to
emulate BT1886 (see step #2). However, you can use whatever Gamma you prefer, such as 2.2
or 2.4. Contrast, Brightness, Color and Tint should be set using external test patterns or 3
rd
party calibration tools.
